create hyperrealistic photographic image of a reclining subject positioned on a cushioned surface, posed dynamically yet naturally to emphasize relaxed body alignment and scientifically accurate anatomical proportions, depicting a petite, symmetrical oval face with balanced facial thirds: the forehead, spanning approximately 9.8 cm wide and 8.7 cm tall, transitions seamlessly into the midface containing almond-shaped eyes, a button-shaped nose, and softly rounded cheeks, while the lower third tapers into a defined chin measuring 4.3 cm wide with a projection of 1.5 cm; the skin tone is Fitzpatrick Type I-II, HEX code #F3D4C6, featuring alabaster-like translucence, cool undertones, smooth and poreless texture, with faint bluish hues at the temples and subtle freckles scattered symmetrically across the nose and cheeks, each measuring approximately 0.1–0.3 mm in size; cheekbones measure 12.2 cm in width, and the face length from hairline to chin measures 19.9 cm, maintaining a golden ratio width-to-length proportion of 0.61; nasofrontal angle is approximately 135 degrees, nasolabial angle 103 degrees, and mentolabial angle 121 degrees, ensuring facial harmony; the eyes are vivid light blue (Martin-Schultz Scale Level 2, HEX code #9CCFFB), each measuring 30 mm wide and 11 mm tall, with an inner corner spacing of 32 mm, featuring intricate radial striations and sclera bright white without discoloration; upper eyelashes are naturally curled, measuring approximately 8 mm in length, while lower lashes are 4 mm; eyebrows are medium-thick and full, arched symmetrically with a length of 6.4 cm, tapering from 8 mm thickness to 5 mm at the tail; the nose has a concave bridge and rounded tip, measuring 3.4 cm in length, 1.2 cm in bridge width, and 2.3 cm in nostril width; lips are full with a defined Cupid’s bow, upper lip height of 7 mm, lower lip height of 10 mm, and a total mouth width of 4.9 cm, with a philtrum length of 11 mm; the ears are proportional and oval-shaped, measuring 6.4 cm in height and 3.5 cm in width, aligned symmetrically with the outer corners of the eyes; the hair is platinum blonde (Fischer-Saller Scale A, HEX code #EDE1CF), fine and straight with occasional soft waves, measuring approximately 30 cm in length, reaching just below the shoulders with a gently rounded hairline; the body adheres to a petite, slender hourglass figure, standing approximately 150 cm tall and weighing 42 kg, with bust measurements of 81 cm, waist 49 cm, and hips 82 cm, achieving a bust-to-waist ratio of 1.65 and a waist-to-hip ratio of 0.6; breasts are small yet symmetrical, measuring 7.2 cm in width and projecting 1.6 cm; arms are proportionate, measuring 54 cm in length with an upper arm circumference of 17.8 cm, forearm circumference of 15.3 cm, and wrist circumference of 13.2 cm; legs are proportional, slightly exceeding half the total height, measuring 82 cm in length with a thigh circumference of 36.8 cm, calf circumference of 27.4 cm, and ankle circumference of 17.5 cm; feet are petite, measuring 20.9 cm in length and 7.9 cm in width, with high, symmetrical arches; poses vary to highlight natural body alignment, such as lying flat on the back with arms resting overhead, legs bent asymmetrically or extended dynamically, or lying on the stomach with legs bent upward at the knees and head tilted sideways; the cushioned surface, upholstered in a soft material, features visible stitching and subtle creasing to reflect weight distribution naturally; wardrobe is form-fitting, consisting of garments with geometric cutouts or minimalistic patterns, constructed from matte or semi-gloss fabrics to avoid distracting reflections; background settings incorporate minimalist interior designs with neutral tones such as soft gray or beige, complemented by darker shadows at the edges for depth; lighting is diffuse, originating from multiple soft sources to eliminate harsh contrasts and enhance the subject’s contours, with fine details such as stray hairs, faint skin folds, and fabric textures rendered meticulously to reinforce photorealism; composition adheres to rule-of-thirds principles to ensure balanced visual weight, focusing on creating a cohesive and scientifically accurate depiction with precise attention to proportions, textures, and lighting.
Prompt Negativo:
Avoid any deviations from precisely described anatomical and physiological characteristics. Exclude face shapes other than symmetrical oval; avoid square, round, heart, diamond, triangular, or oblong shapes. Avoid asymmetrical features or imbalanced proportions; ensure that all facial thirds (forehead, midface, lower face) are perfectly proportional. Avoid forehead widths less than 9 cm or greater than 11 cm; avoid forehead heights below 8 cm or above 11 cm. Exclude foreheads with sharp, angular, or overly flat edges, or foreheads that are disproportionately wide, narrow, or irregularly shaped. Do not include skin tones darker or lighter than Fitzpatrick Type I; exclude Fitzpatrick Types II, III, IV, V, or VI. Avoid any undertones other than cool; exclude neutral, warm, or olive undertones. Exclude any blemishes, visible pores, scars, acne, or uneven skin texture; avoid overly textured, dry, or plastic-like skin appearances. Freckles should be faint, small, and symmetrically scattered; avoid large, dark, or randomly distributed freckles. Exclude nasofrontal angles below 125 degrees or above 135 degrees; avoid jawline angles less than 120 degrees or greater than 130 degrees; exclude mentolabial angles less than 115 degrees or greater than 125 degrees; avoid nasolabial angles less than 95 degrees or greater than 110 degrees. Avoid exaggerated facial angles or overly flat planes inconsistent with soft, symmetrical contours. Exclude chin shapes that are sharp, pointed, cleft, overly square, or lacking symmetry; avoid chin widths exceeding 5 cm or below 3 cm, and projections greater than 2 cm or less than 1 cm. Jawline lengths must not exceed 10 cm or fall below 7 cm; avoid flat, overly sharp, or exaggerated jawlines. Cheekbones must not be low, overly wide, flat, or lacking definition; exclude cheekbone widths exceeding 14 cm or below 12 cm, and cheekbone projections greater than 6 mm or less than 4 mm. Avoid thin, bushy, thick, straight, steeply arched, overly defined, or uneven eyebrows. Eyebrows should not be shorter than 5 cm or longer than 6.5 cm; exclude colors that are too light, dark, or inconsistent with medium brown. Avoid eye shapes that are round, droopy, hooded, monolid, narrow, or overly large; exclude eyes spaced too far apart (above 3.2 cm) or too close together (below 2.4 cm). Avoid eye colors other than light blue; exclude green, hazel, brown, gray, or any unnatural hues. Avoid iris diameters exceeding 12 mm or below 11 mm; scleras must be bright white, free of dullness, gray tones, bloodshot veins, or yellowing. Upper eyelashes should not exceed 12 mm or fall below 6 mm; lower eyelashes must not be missing, sparse, or excessively long. Exclude noses that are large, broad, hooked, upturned, overly narrow, or lacking symmetry. Nose lengths must not exceed 5 cm or fall below 4 cm; exclude bridge widths wider than 1.8 cm or narrower than 1.2 cm; nostrils must not be overly flared, asymmetrical, or rectangular. Avoid lip shapes that are thin, overly full, asymmetrical, or lacking definition. Exclude upper lip heights above 8 mm or below 4 mm; lower lip heights should not exceed 12 mm or fall below 8 mm. Mouth widths must not exceed 6 cm or fall below 4 cm; exclude philtrum lengths above 15 mm or below 10 mm. Avoid ears that are pointed, large, protruding, asymmetrical, or disproportionate to the face. Ear heights must not exceed 5 cm or fall below 3.5 cm; ear widths must not exceed 2.5 cm or fall below 1.8 cm. Avoid ears misaligned with eye level or exhibiting irregular contours. Exclude hairlines that are uneven, receding, or irregularly shaped. Avoid hair colors outside the platinum blonde range; exclude light blonde, red, black, or unnatural hues. Avoid face textures that appear overly smooth, plastic-like, doll-like, or excessively textured. Ensure facial angles are proportional, avoiding overly sharp or flat planes. Exclude proportions or features inconsistent with a symmetrical oval face shape. Avoid missing, misaligned, or disproportionate facial features. Ensure all features align with a cohesive, youthful, and natural appearance, with no exaggerations or distortions. Exclude lighting artifacts, exaggerated shadows, harsh contrasts, or overly flat illumination. Ensure lighting is consistent with natural, even conditions to enhance realistic depth and texture. Avoid unrealistic or artistic abstractions, exaggerated facial angles, or features inconsistent with the described anatomical standards. Exclude any deviations from the harmonious proportions outlined in the original prompt. Do not allow any inconsistencies with fair-skinned, light blue-eyed, platinum blonde-haired subjects with petite, symmetrical, and anatomically precise physical features. Skin, eye, and hair tones must strictly adhere to the Fitzpatrick, Martin-Schultz, and Fischer-Saller scales as described; deviations from these scales will not be accepted. Reject non-physiologically possible proportions, exaggerated facial angles, or features inconsistent with natural human anatomy. The final output must align with the original prompt’s specified measurements, proportions, and traits to achieve a scientifically accurate and photorealistic result. Do not allow for any features inconsistent with the cohesive, balanced, and proportional aesthetic described in the original parameters. Ensure complete adherence to anatomical and physiological standards without artistic license or deviations from exact specifications.